ProductsShopping basketFAQAbout usLinksDeutsch
Products




Welcome to servorahmen.de


We produce high-quality servoframes for easy wing-installation of servos in model airplanes. Plastic-injection production leads to precise frames and constant quality at low prices.

Use our >>> servoframe-selector <<< to find the frame which fits your servo.

 

Site in german language

 

 


Shopping basket
Next page


Product: Enter quantity:
Type Robbe 11 Bearing

Servoframe "Type Robbe 11 Bearing" with integrated counter bearing.
The servoframe is as thin as the servo itself and keeps it precisely in position. The frame is fixed in the wing with epoxy while two screws hold the servo in the frame. Two close-fittings connect servo and frame.

The system makes linkages possible which are free from play but also allows to replace a damaged servo within seconds. The frame is fixed in the wing with epoxy.

The frame can be used for left or right side equally.

Technical data:
outer dimensions: 56 x 53 x 11 millimeter
weight: 8 gram

The following servos fit to our frame "Typ Robbe 11 Bearing":

Robbe S 3150, S 3155, S 3171 SB, S 3172 SV und S 3174 SV

price per piece

Price: 9,89 EUR
(without VAT: 8,31)
Qty:
Product: Enter quantity:
Type Robbe 3173 Bearing

Servoframe "Type Robbe 3173 Bearing" with integrated counter bearing.
The frame is thin as the servo. Due to the innovative design, the servo can be installed without screws.
The screw of the servo output shaft is replaced by an aluminium part. So you need no tools for removal and installation of the servo.
The frame is fixed in the wing with epoxy.

The frame can be used for left or right side equally.

Technical data:
outer dimensions: 55 x 49 x 10 millimeter
weight: 6,6 gram

The following servos fit to our frame "Typ Robbe 3173 Bearing":

Robbe Futaba S 3173 SVi

Please notice: JR wing servos do not fit to this frame!!!

price per piece

Price: 9,89 EUR
(without VAT: 8,31)
Qty:
Product: Enter quantity:
Type MKS DS 6100 Bearing

Servoframe "Type MKS DS 6100 Bearing" with integrated counter bearing.
The servoframe is as thin as the servo itself and keeps it precisely in position. The frame is fixed in the wing with epoxy while two screws hold the servo in the frame. Two close-fittings connect servo and frame.

The system makes linkages possible which are free from play but also allows to replace a damaged servo within seconds. The frame is fixed in the wing with epoxy.

The frame can be used for left or right side equally.

Technical data:
outer dimensions: 40 x 37 x 10 millimeter
weight: 4 gram

The following servos fit to our frame "Typ MKS DS 6100 Bearing":

MKS DS 6100, HV 6100, DS 450, DS 470, DS 480

price per piece

Price: 9,89 EUR
(without VAT: 8,31)
Qty:
Product: Enter quantity:
Type DES 16 Bearing

Servoframe "Type DES 16 Bearing" with integrated counter bearing.
The servoframe is as thin as the servo itself and keeps it precisely in position. The frame is fixed in the wing with epoxy while two screws hold the servo in the frame. Two close-fittings connect servo and frame.

The system makes linkages possible which are free from play but also allows to replace a damaged servo within seconds. The frame is fixed in the wing with epoxy.

The frame can be used for left or right side equally.

Technical data:
outer dimensions: 60 x 56 x 16,5 millimeter
weight: 9 gram

The following servos fit to our frame "Typ DES 16 Bearing":

Graupner DES 6xx series, 657, 658, 676, 678 and Graupner HVS 933 BB MG

price per piece

Price: 9,89 EUR
(without VAT: 8,31)
Qty:
Product: Enter quantity:
Typ 11 B Bearing

Servoframe "Type 11 B Bearing" with integrated counter bearing.
The frame is thin as the servo. Due to the innovative design, the servo can be installed without screws.
The screw of the servo output shaft is replaced by an aluminium part. So you need no tools for removal and installation of the servo.
The frame is fixed in the wing with epoxy.

The frame can be used for left or right side equally.

Technical data:
outer dimensions: 55 x 49 x 10 millimeter
weight: 6,6 gram

The following servos fit to our frame "Typ 11 B Bearing":

Graupner DS 3288, JR DS 171, JR DS 179 HV, JR DS 189 HV, JR DS 378, JR DS 398

Please notice: Robbe Futaba S 3173 SVi servo does not fit

price per piece

Price: 9,89 EUR
(without VAT: 8,31)
Qty:

Servoframes
Product: Enter quantity:
Type 11
Our servoframe "Type 11" is as thin as the servo itself and keeps it precisely in position. The frame is fixed in the wing with epoxy while two screws hold the servo in the frame. Two close-fitting red pieces connect servo and frame.
The system makes linkages possible which are free from play but also allows to replace a damaged servo within seconds.


Technical Data:
outer dimensions: 36 x 25 x 11 millimeter
that is 1.42 x 0.79 x 0.43 Inch
weight: ca. 2 grams
The following servos fit our frame Type 11:

Graupner/JR C 261, C271, C 121 and DS 281

please note that JR-numbers may be different from Graupner-numbers.


Price is for one (!) frame, including two screws and two adapter pieces.

Price: 4,84 EUR
(without VAT: 4,07)
Qty:
Product: Enter quantity:
Type 13
Our servoframe "Type 13" is as thin as the servo itself and keeps it precisely in position. The frame is fixed in the wing with epoxy while two screws hold the servo in the frame. Two close-fitting red pieces connect servo and frame.
The system makes linkages possible which are free from play but also allows to replace a damaged servo within seconds.


Technical Data:
outer dimensions: 45 x 35 x 13 millimeter
that is 1.75 x 1.38 x 0.51 Inch
weight: ca. 4 grams
The following servos fit our frame Type 13:

Graupner/JR C 341, C 351, DS 361, DS 368, DS 3068, C 3141

please note that JR-numbers may be different from Graupner-numbers.


Price is for one (!) frame, including two screws and two adapter pieces.

Price: 4,84 EUR
(without VAT: 4,07)
Qty:
Product: Enter quantity:
Type 15
Our servoframe "Type 15" is as thin as the servo itself and keeps it precisely in position. The frame is fixed in the wing with epoxy while two screws hold the servo in the frame. Two close-fitting yellow pieces connect servo and frame.
The system makes linkages possible which are free from play but also allows to replace a damaged servo within seconds.


Technical Data:
outer dimensions: 50 x 32 x 15 millimeter
that is 1.97 x 1.26 x 0.59 Inch
weight: ca. 5 grams
The following servos fit our frame Type 15:

Graupner/JR C 3241, C 3031, C 3041, DS 3728, DS 3781

please note that JR-numbers may be different from Graupner-numbers.


Price is for one (!) frame, including two screws and two adapter pieces.

Price: 4,84 EUR
(without VAT: 4,07)
Qty:
Product: Enter quantity:
Type 19
Our servoframe "Type 19" is as thin as the servo itself and keeps it precisely in position. The frame is fixed in the wing with epoxy while four screws hold the servo in the frame. Two close-fitting green pieces connect servo and frame.
The system makes linkages possible which are free from play but also allows to replace a damaged servo within seconds.


Technical Data:
outer dimensions: 45 x 35 x 13 millimeter
that is 1.75 x 1.38 x 0.51 Inch
weight: ca. 4 grams
The following servos fit our frame Type 19:

Graupner/JR C 4621, C 4421, C 4451, C 4835, C 4855, C 4821, C 5177, DS 8025, DS 8041, DS 8231, DS 8411, DS 8417, DS 8418, DS 8700G, DS 5391, DS 5491 und DS 8311

please note that JR-numbers may be different from Graupner-numbers.


Price is for one (!) frame, including two screws and two adapter pieces.

Price: 5,36 EUR
(without VAT: 4,50)
Qty:
Product: Enter quantity:
Type ATX
Our servoframe "Type ATX" is as thin as the servo itself and keeps it precisely in position. The frame is fixed in the wing with epoxy while two screws hold the servo in the frame. Two close-fitting red pieces connect servo and frame.
The system makes linkages possible which are free from play but also allows to replace a damaged servo within seconds.


Technical Data:
outer dimensions: 47 x 36 x 12 millimeter
that is 1.85 x 1.42 x 0.47 Inch
weight: ca. 4 grams
The following servos fit our frame Type ATX:

Airtronics 94761, LRP SDX-762


Price is for one (!) frame, including two screws and two adapter pieces.

Price: 4,84 EUR
(without VAT: 4,07)
Qty:
Next page



Servorahmen GmbH I Geschäftsführer ist Florian Kreuz I Impressum
Elbestraße 9 I 63303 Dreieich I Deutschland I Tel.: 0049 6103 3869394 I info@servorahmen.de