ProductsShopping basketFAQAbout usLinksDeutsch
Products




Welcome to servorahmen.de


We produce high-quality servoframes for easy wing-installation of servos in model airplanes. Plastic-injection production leads to precise frames and constant quality at low prices.

Use our >>> servoframe-selector <<< to find the frame which fits your servo.

 

Site in german language

 

 


Shopping basket
Previous page
Next page

Servoframes
Product: Enter quantity:
Type GRP
The servo is screwed into the servo-mount which is fixed in the wing with epoxy. The precise installation of the servo allows you to build linkages that are free from play. In case of a damage the servo can be replaced within seconds.


Technical Data:
outer dimensions: 45 x 35 x 13 millimeter
that is 1.75 x 1.38 x 0.51 Inch
weight: ca. 4 grams
The following servos fit our frame Type GRP:

Graupner C 3341, C 3321, DS 3328 und DS 3301

please note that JR-numbers may be different from Graupner-numbers.


Price is for one (!) frame, including four screws.

Price: 3,90 EUR
(without VAT: 3,28)
Qty:
Product: Enter quantity:
Type Hitec 11
The servo is screwed into the servo-mount which is fixed in the wing with epoxy. The precise installation of the servo allows you to build linkages that are free from play. In case of a damage the servo can be replaced within seconds.


Technical Data:
outer dimensions: 45 x 35 x 13 millimeter
that is 1.75 x 1.38 x 0.51 Inch
weight: ca. 4 grams
The following servos fit our frame Type Hitec 11:

HiTec HS-125, HS-5125, Graupner DS 3210, JR 168, TS 014 MG, and Turnigy 555 MG

  

Price is for one (!) frame, including three screws.

Price: 3,90 EUR
(without VAT: 3,28)
Qty:
Product: Enter quantity:
Type Hitec 13
Our servoframe "Type Hitec 13" is as thin as the servo itself and keeps it precisely in position. The frame is fixed in the wing with epoxy while two screws hold the servo in the frame. Two close-fitting white pieces connect servo and frame.
The system makes linkages possible which are free from play but also allows to replace a damaged servo within seconds.


Technical Data:
outer dimensions: 47 x 37 x 13 millimeter
that is 1.85 x 1.51 x 0.53 Inch
weight: ca. 4 grams
The following servos fit our frame Type Hitec 13:

HiTec HS 85 BB and HS 85 MG


Price is for one (!) frame, including two screws and two adapter pieces.

Price: 4,84 EUR
(without VAT: 4,07)
Qty:
Product: Enter quantity:
Type Robbe 13
Our servoframe "Type Robbe 13" is as thin as the servo itself and keeps it precisely in position. The frame is fixed in the wing with epoxy while two screws hold the servo in the frame. Two close-fitting purple pieces connect servo and frame.
The system makes linkages possible which are free from play but it also allows to replace a damaged servo within seconds.


Technical Data:
outer dimensions: 47 x 37 x 13 millimeter
that is 1.92 x 1.51 x 0.53 Inch
weight: ca. 4 grams
The following servos fit our frame Type Robbe 13:

Robbe/Futaba S 3101, S 3102, with rework: Power Blue 13MG (Schweighofer)


Price is for one (!) frame, including two screws and two adapter pieces.

Price: 4,84 EUR
(without VAT: 4,07)
Qty:
Product: Enter quantity:
Type Robbe 8
Our servoframe "Type Robbe 8" is as thin as the servo itself and keeps it precisely in position. The frame is fixed in the wing with epoxy while two screws hold the servo in the frame. Two close-fitting adaptor pieces that come with the servo connect servo and frame.
The system makes linkages possible which are free from play but it also allows to replace a damaged servo within seconds.


Technical Data:
outer dimensions: 36 x 25 x 8 millimeter
that is 1.47 x 1.02 x 0.33 Inch
weight: ca. 2 grams
The following servos fit our frame Type Robbe 8:

Robbe/Futaba FS 31 and  Dymond D4.7


Price is for one (!) frame, including two screws.

Price: 3,90 EUR
(without VAT: 3,28)
Qty:
Product: Enter quantity:
Type Robbe 9
Our servoframe "Type Robbe 9" is as thin as the servo itself and keeps it precisely in position. The frame is fixed in the wing with epoxy while two screws hold the servo in the frame. Two close-fitting adaptor pieces that come with the servo connect servo and frame.
The system makes linkages possible which are free from play but it also allows to replace a damaged servo within seconds.


Technical Data:
outer dimensions: 42 x 32 x 9 millimeter
that is 1.71 x 1.3 x 0.37 Inch
weight: ca. 2 grams
The following servos fit our frame Type Robbe 9:

Robbe FS 40, Dymond D60



Price is for one (!) frame, including two screws.

Price: 3,90 EUR
(without VAT: 3,28)
Qty:
Product: Enter quantity:
Type Robbe 11
Our servoframe "Type Robbe/Futaba 11" is as thin as the servo itself and keeps it precisely in position. The frame is fixed in the wing with epoxy while two screws hold the servo in the frame. Two close-fitting purple pieces connect servo and frame.
The system makes linkages possible which are free from play but it also allows to replace a damaged servo within seconds.


Technical Data:
outer dimensions: 47 x 36 x 11 millimeter
that is 1.92 x 1.47 x 0.45 Inch
weight: ca. 4 grams
The following servos fit our frame Type Robbe 11:

Robbe S 3150, S 3155, S 3171 SB, and S 3172 SV

as well as Hitec HS 81, HS 82 and Hyperion DS 12, DS 13 with modifications



Price is for one (!) frame, including two screws and two adapter pieces.

Price: 4,84 EUR
(without VAT: 4,07)
Qty:
Product: Enter quantity:
Type Volz
The servo is screwed into the servo-mount which is fixed in the wing with epoxy. The precise installation of the servo allows you to build linkages that are free from play. In case of a damage the servo can be replaced within seconds.


Technical Data:
outer dimensions: 46 x 40 x 6 millimeter
weight: ca. 3 grams
The following servos fit our frame Type Volz:
Volz Micro Maxx and Micro Maxx XP


Price is for one (!) frame, including three screws.

Price: 4,84 EUR
(without VAT: 4,07)
Qty:
Product: Enter quantity:
Type Hitec 17
Type Hitec 17
Our servoframe "Type Hitec 17" is as thin as the servo itself and keeps it precisely in position. The frame is fixed in the wing with epoxy while two screws hold the servo in the frame. Two close-fitting red pieces connect servo and frame.
The system makes linkages possible which are free from play but also allows to replace a damaged servo within seconds.


Technical Data:
outer dimensions: 40 x 52 x 17 millimeter
that is 1.57 x 2.05 x 0.67 Inch
weight: ca. 3 grams
The following servos fit our frame Type Hitec 17:

Hitec HS 225 BB, HS 225 MG, HS 5245 MG
Hyperion DS 16



Price is for one (!) frame, including two screws and two adapter pieces.

Price: 4,84 EUR
(without VAT: 4,07)
Qty:
Product: Enter quantity:
Type Robbe 12 A
Our servoframe "Type Robbe 12 A" is as thin as the servo itself and keeps it precisely in position. The frame is fixed in the wing with epoxy while two screws hold the servo in the frame. Two close-fitting green pieces connect servo and frame.
The system makes linkages possible which are free from play but it also allows to replace a damaged servo within seconds.


Technical Data:
outer dimensions: 51 x 44 x 12 millimeter
that is 2.08 x 1.8 x 0.47 Inch
weight: ca. 3 grams
The following servos fit our frame Type Robbe 12 A:

Robbe/Futaba FS 70 MG and FS 75
Hyperion Atlas DS12 Series



Price is for one (!) frame, including two screws and two adapter pieces.

Price: 4,84 EUR
(without VAT: 4,07)
Qty:
Previous page
Next page



Servorahmen GmbH I Geschäftsführer ist Florian Kreuz I Impressum
Elbestraße 9 I 63303 Dreieich I Deutschland I Tel.: 0049 6103 3869394 I info@servorahmen.de